DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

En Stock

Available

SI TECH

Sitech, external valve port 75mmø

60885

5.36 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

inflation and exhaust valves

Sitech, external valve port 85mmø

60895

4.64 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

SI TECH

Sitech, External Valve port with flange

60810

6.34 €

External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange Fits all...

En Stock

Available

SI TECH

Sitech, Inner Glove, Kleven

9.38 €

Kleven Inner glove is a thin and flexible inner glove with very good thermal capability. Knitted with polyester hollow fiber (97 %) and spandex (3 %). Advanced materials and deliberate design ensures the best heat insulation and a faster drying time than comparable materials. Short cuff. Tight around the wrist (low risk of getting stuck in locking...

En Stock

Available

SI TECH

Sitech, Internal Valve Port

60852-cut

3.02 €

Internal valve port used in the installation of Sitech valves.

En Stock

Available

SI TECH

Sitech, ORUST neck ring

60174

24.17 €

Neck Ring for the ORUST Neck system.

Fuera de Stock

Ask us about availability

SI TECH

Sitech, ORUST Neck System

69.00 €

ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments.

En Stock

Available

SI TECH

Sitech® LIANA

60780

103.01 €

LIANA is a user friendly and versatile squeeze-on Dry Glove system. SLÄGGÖ Flex Ring works as attachment platform for LIANA. Don by squeezing. Doff by turning the release ring with one hand. Benefits User friendly Self supported Accomodating most hands Sturdy construction.

En Stock

-23%

Available

SI TECH

Sitech® OBERON

60770

79.32 € 103.01 €

OBERON is a round Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. OBERON is an easy to use Dry Glove System, designed to perform - no matter the diving environment. OBERON Dry Glove System is a bayonet system that is easy to lock and release.

En Stock

Available

SI TECH

SLÄGGÖ Flex Ring

71.25 €

SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation

En Stock

Available

Service kits and O-Rings

Small kit of O-Rings

jnt-kit-0001

11.30 €

A kit with the main diving O-rings that we may need at any time.It comes in a 5cm diameter can that will fit us anywhere.It has viton and standard O-Rings for: bottleneck, two-measure of DIN, for the HP hose, for the HP nipple, for the regulator hose (both terminals), a nipple for the HP gauge-hose and a schrader valve nipple for the inflator hose.

En Stock

Available

SI TECH

Spanner Ring for SITECH SLÄGGÖ

60715

6.53 €

En Stock

Available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves)

14.10 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.They are also available with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

En Stock

Available

SPARE PARTS & EXTRAS

Sparepart Set (for all valves) Nitrox

16.52 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.These kits are Oxygen compatibleChoose the appropriate one from the drop-down menu.

En Stock

Available

STEEL HARDWARE

Stainless Steel Eyelet 10mmø

8473

1.12 €

10mmø Stainless steel eyelet with for riveting.

En Stock

Available

J.Dive Systems

Stainless Steel single tank adapter J.Dive

jdive0002

43.65 €

New edition of J.Dive steel single tank adapters (STA). In the same vein as the J.Dive Backplates, the hand-finished finishes are exceptional 316L stainless steel adapter Measurements: 33cm X 8.8cm Weight: 660.00gr

En Stock

Available

STEEL HARDWARE

Stainless Steel stopper

80001

1.38 €

Fuera de Stock

Out-of-Stock

STEEL HARDWARE

Steel washer

jdive0028

0.50 €

Made of stainless steel 3041.8mm thick x 24mm in diameter. Suitable for screws up to 8mmø

View

En Stock

Available

SPARE PARTS & EXTRAS

Stem with O-ring and Teflon Packing

6.66 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 2 shown in the photo. They are also available mounted with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

En Stock

Available

Spare parts

Tank band with S.S cam buckle

30046

24.15 €

En Stock

Available

inicio

Tank Carrier Handle

ACC-BOT-0001

14.04 €

Fixed scuba tank holder handle. Ergonomic handle to prevent slipping. Fixing with 2 steel screws.

En Stock

Available

STEEL HARDWARE

Teflon washer

jdve0027

1.00 €

Teflon washer especially indicated for aluminum backplates in order to prevent the contact of the steel screws with the backplate. Perfectly suitable also for use on steel backplates as a washer without more ... 1mm thick x 16mm in diameter. Suitable for screws up to 8mmø

En Stock

Available

STEEL HARDWARE

Trim bar glider "T" type

80135

3.86 €

Multipurpose "T" type stainless steel retainer. Dimensions of the slots up to use with standard 5cm wide webbing.

En Stock

Available

STEEL HARDWARE

Trim bar glider with double Ring

80313

3.30 €

Stainless steel retainer for 5cm webbing with rings on both sides. Exterior measure: 57mm x 33mm Slots measure: 52mm x 6mm Interior measure of the rings: 25m x 19mm Thickness: 1.5mm

Showing 217-240 of 250 item(s)