DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

Fuera de Stock

Ask us about availability

STEEL HARDWARE

Bolt Snap Stainless Steel 316L

6.60 €

316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. 4 sizes available: 90mm: 21mm x 11mm eye and 20mm x 15mm ring 100mm: 21mm x 11mm eye and 23mm x 21mm ring 110mm: 21mm x 11mm eye and 37mm x 34mm ring Choose the desired size from the drop-down menu

En Stock

Available

STEEL HARDWARE

Bolt Snap Technical, Stainless Steel 316L

9.83 €

316L Steel bolt snaps. Its high quality not only in the exterior steel and finish but also in the spring used makes them a very smooth operation. Its large anti-snag trigger allows us to use them with any type of gloves or without them, comfortably and precisely. The eye design makes them quick to clip. The three options have the same body size, differing...

En Stock

-15%

Available 24-48h

Hardware things...

Book screw tool

A11918097

1.33 € 1.57 €

Specific tool to facilitate the screwing-unscrewing operation of the Book screw set for backpad, backplate, argon systems, etc It is sold individually but two pieces are recommended to facilitate the work Link to the Screw set

En Stock

-15%

Available

Pressure Gauge

Boot for 52 and 63mm Gauges

7.98 € 9.39 €

Looking for protective boots, this is what you're looking for. The boots are made from a high quality thermoplastic for extended life, impact resistant to keeps your gauges safe and this console boot has a sleek low profile. These protectors are intended to house metal gauges, both 52mm and 63mm. Choose the required option from the drop-down menu. Option...

En Stock

-15%

Available

CONTROL INSTRUMENTS

Boot for stage Gauges

A14118008

7.98 € 9.39 €

Looking for protective boots, this is what you're looking for. The boots are made from a high quality thermoplastic for extended life, impact resistant to keeps your gauges safe and this console boot has a sleek low profile. NOTE: the pressure gauge that can be seen in the photo IS NOT INCLUDED in the price

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

Jdive00BH

49.58 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

En Stock

Available

STEEL HARDWARE

Buckle for adjustable harness, s-s

DTD 3005

7.82 €

En Stock

Available

BUNGEE MOUNTS/COMPASS

BUNGEE in 4, 5, 6 and 8mm

1.12 €

Price per meter

En Stock

Available

inicio

Canister fixing system

jdive0032

18.10 €

The system is provided with a strap with a stainless steel eyelet and screws to attach it to the backplate and the additional stainless steel buckle.

En Stock

Available

Accesories / Weight

Cobra weight Belt

jdive0025

23.97 €

Ballast belt mounted with the Cobra GT closure of Scuba Force and a soft strap to be able to mount and disassemble the leads in seconds and also be able to easily tighten and loosen the belt. NOTE: the leads are not included

En Stock

Available (48-72h)

Spare parts

Combi Inflator tool

80056

4.00 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Available

Service kits and O-Rings

Complete O-Rings kit

jnt-box-0001

39.67 €

Complete kit with viton and standard O-Rings for: the neck of the tank, the HP nipples, for regulator hoses both terminals, for HP hoses, 2 sizes for regulator DIN connection, HP nipples, schrader valves for the inflator hose with its specific tool and 2 INT racors...

En Stock

Available

Arrows & Cookies

Cookie large

DTD 3110

0.55 €

Cookie large 55mm ø

En Stock

Available

Arrows & Cookies

Cookie large Red

DTD 3114

0.55 €

Cookie large Red 55mm ø

En Stock

Arrows & Cookies

Cookie small Red

nonstockcookiered

0.96 €

Cookie small Red 38mm ø

En Stock

Available

Service kits and O-Rings

copy of

JNT-NBR-0004

3.90 €

20 units of O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage)

En Stock

Available

Miscellaneous

copy of Extensible clip with swivel

Cordon extensible

14.05 €

Extensible clip with swivel snap hook and stainless steel ring.On one end includes a steel key ring in order to set and hold onto surface; the other includes a plastic carabiner to hold to a BD ring or another part of the diving gear. With its easy extension, it allows diver to use cameras, lighst or other accessories without having to let go.Available...

En Stock

Available

J.Dive Flex HQ

copy of J.Dive Flex HQ hose, LP Regulator Orange

14.58 €

J.Dive Flex HQ regulator hoses We incorporate this new braid which offers better qualities in terms of elasticity.The J.Dive Flex hoses are assembled in our facilities following the most stringent quality controls. When assembling them ourselves, we are able offering hoses to any size you need, being able to select the measure that is really...

Fuera de Stock

-20%

Ask us about availability

inicio

copy of Scubapro D-Mask

D-Mask-Trans

138.84 € 173.55 €

Sharing the design scheme of the D-Series D420 regulator, the D-Mask is a sleek, premium mask well-suited for all types of diving. The mask features true colour UV protective lenses that deliver the best balance of surface protection and underwater clarity.

En Stock

Available

Spare parts

copy of Service Kit for X01 end Inflator

DTD 3429

30.00 €

Box with 10 services for the J01 end inflator used in DTD end inflators and in others brands... Picture could not match with the right kit...

En Stock

Available

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

20.00 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

En Stock

-15%

Available

inicio

Cover for Book Screw nut flat

A11818019

0.71 € 0.83 €

Rubber cover for Book Screw nut flat 1/4" Link to the Book Screw nut NOTE: The price corresponds only to the rubber cover, the visible nut in the photo is for illustrative purposes

En Stock

Available

inicio

Crotch strap 5cm wide ( 2")

30045

12.27 €

Crotch strap 5cm wide and very soft to the touch to prevent damage to the diving suit and make it more comfortable when closing the legs around it. It has a front D-Ring up to fix the scooter, and also a rear D-Ring.

En Stock

Available

Accessories

crotch strap complete

jdive0015

10.87 €

Showing 25-48 of 790 item(s)