DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

En Stock

Available

ADAPTERS

2nd Stage Quick Connect-Disconnect system

SF2LADAP INFL

37.19 €

9/16" female adapter (second stage inlet) to standard jacket quick connect

En Stock

Available

ADAPTERS

2nd Stage Quick Disconnect system

SF S-03-4

33.05 €

En Stock

Available

REGULATOR ACCESORIES

9/16 male to 3/8 female

SFAD02

5.37 €

9/16" male to 3/8" female

En Stock

Available

REGULATOR ACCESORIES

Adapter 1/2" a 3/8"

SFAD04

5.37 €

Adapter 1/2" a 3/8" male 1/2" to female 3/8"

En Stock

Available

ADAPTERS

Adapter 3/8" female to 9/16" female

DT331A

37.19 €

Female-female adapter 3/8" to 9/16" The photo shows both sides of the adapter for illustrative purposes only but ONLY one unit is included in the price.

En Stock

Available

SI TECH

ANTARES Glove Ring.

60261

10.00 €

ANTARES Glove Ring.

En Stock

Available

SI TECH

ANTARES Spanner Rings

5.70 €

The two diffrent Spanner Rings allows a variety of gloves to be used. Blue Spanner Ring for thin gloves and green Spanner Ring for thick gloves. Item nº:60263 (Blue) Item nº: 60264 (Green)

En Stock

Aros fijadores para sistemas Quick Glove

Available

SI TECH

Aros fijadores para sistemas Quick Glove

3.00 €

Black: de 1,5mm thick, to use with thick gloves (ref. 60211) Amarillo: 2,0mm thick, to use with medium-thick gloves (ref. 60214) Azul: 2,4mm thick, to use with medium-thin gloves (ref. 60212) Verde: 2,6mm thick, to use with thin gloves (ref. 60219)

En Stock

Available

inflation and exhaust valves

Blanking plug for SI TECH Valves

14.42 €

Blanking plug for SI TECH Pee Valve, Inflation and Exhaust Valves. Item no: 60340 Large guide ridge Item no: 60335 Small guide ridge

Fuera de Stock

Ask us about availability

SI TECH

Blue PVC Glove - Extended cuff

47.11 €

A seamless glove made of PVC and latex, with a straight seal. Suitable for Dry Glove Systems where the glove is pulled over the ring. A durable and cost effective Dry Glove. Easy to use. These gloves make diving both comfortable and warm, and therefore makes it possible to keep the dexterity in the hands much better. These gloves comes with a separate...

En Stock

Available

inner and outer gloves

Blue PVC Gloves with acrylic liner

38.84 €

A seamless glove made of PVC. These gloves comes with a separate acrylic liner which provides warmth and comfort to your hands. Note! Size X-large is not suitable for ANTARES Dry Glove System (the shaft is too wide)! We recommend PVC Glove - Extended cuff, item no. 60575-XL (blue).

En Stock

Available

STEEL HARDWARE

Bolt snap, stainless steel

5.12 €

Four sizes available: S: 64 mm length 16 mm ø approx. for the Eye and 11mm ø for the end ring M: 80 mm length 18 mm ø approx. for the Eye and 16mm ø for the end ring L: 92mm length 21 mm ø approx. for the Eye and 19mm ø for the end ring XL: 117 mm length 18 mm ø approx. for the Eye and 34mm ø for the end ring

En Stock

Boltsnap, coldwater boltsnap,stainless steel, 120mm

Available

STEEL HARDWARE

Boltsnap, coldwater boltsnap,stainless steel, 120mm

bs120

8.26 €

Boltsnaps, the fixing solution in technical diving. Whether to attach the primary regulator, the lamp, the backup lamp or the pressure gauge - always this carabiner is used for. The size is the way specified in the length and diameter of the eye. This boltsnap is perfect for cold water conditions. Stainless steell Length ca. 120 mm Diameter Eye ca. 33 mm

En Stock

-15%

Available

SI TECH

Clips set for ORUST Neck System

60179

12.31 € 14.48 €

Sitech® ORUTS Modular Neck System Clips Available as a complete pack of 12 units or individually. Choose the required option from the drop-down menu.

En Stock

-15%

Available

SI TECH

Clips set for SLÄGGÖ Flex Ring

60714

16.20 € 19.06 €

Sitech® SLAGGO modular System Clips Available as a complete pack of 6 units or individually. Choose the required option from the drop-down menu.

En Stock

Available

DECO ESSENTIALS

CORDURA TUBE

88135

2.89 €

En Stock

Available

ADAPTERS

Elbow 110º for second stage

SFS014

21.49 €

Elbow 110º 9/16" connections

En Stock

Available

REGULATOR ACCESORIES

Elbow 3/8"

SFAE0113

20.00 €

Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º

En Stock

Available

ADAPTERS

Female part quick connection system

SF S-03-4F

28.93 €

Female part of the big flow connection system. This part is similar to the ends of the standard inflation hoses, but with much robustness and much more gas flow, the needed for a great diver demand. It has a screw dial part that allows us to block the connection, while blocked it has not possible to disconnect. The hose connection is male 9/16 " (standard...

En Stock

Available

ADAPTERS

Female part quick connection system 3/8"

SF S-03-4F 3/8

28.93 €

En Stock

Available

REGULATOR ACCESORIES

First stage low profile over pressure valve

SFFSAC01

8.26 €

First stage low profile over pressure valve To install on a LP outlet of our first stages and so, prevent a over pressure situation on the complete loop.

En Stock

REGULATOR ACCESORIES

Flow Stop HQ version

SF032DL

24.79 €

2nd Stage Shut with 9/16" male/female connections

En Stock

Available

Accessories

Harness cinch

SF-HARS-R

2.10 €

Standar 5cm wide harness cinch Price per meter

En Stock

Available

DECO ESSENTIALS

Hose Retainer - (40 cuft)

SFSBS40s

4.88 €

En Stock

Available

DECO ESSENTIALS

Hose Retainer - (80 cuft/12L)

SFSBS80s

4.88 €

En Stock

Available

REGULATOR HOSE (Rubber & Miflex)

Inflator grip

SFBCHK

3.20 €

With the inflator grip is really easy operate the inflator terminal hose even with thick gloves.Easy to assembly and a real gain in security

En Stock

Available

JJ-CCR

J-CCR Over pressure valve for 1st stage (17bar)

2010200038

29.00 €

Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

Fuera de Stock

Out-of-Stock

ADAPTERS

JJ-CCR Flow Stop

3000-10

64.00 €

View

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen

Fuera de Stock

-30%

Product available with different options

Kevlar hoses

Kevlar HP hose

25.20 € 36.00 €

Kevlar HP hose Kevlar High pressure Available in various lengths (from 10-150 cm)

View

En Stock

Available

SI TECH

Latex Neck Seal - for Neck Tite

18.84 €

Latex Neck Seal with bellow shape. Sligthly tapered. Guide ribs for easy trimming. Designed to be used with the Neck Tite system. Available in three sizes: Small, Medium and Large.

En Stock

Available

SI TECH

Latex Wrist Seal - Tapered

8.87 €

Latex Wrist Seal with tapered (conical) shape. Available in three models that differ in thickness but share the same measurements See the specifications below or in the product photo itself Choose the required model according to Option 1, 2 or 3 from the drop-down menu

En Stock

Available

SI TECH

Latex Wrist Seal - Tapered (ext length)

9.92 €

Latex Wrist Seal with tapered (conical) shape extra length. Available in 2 models that differ in thickness but share the same measurements See the specifications below or in the product photo itself Choose the required model according to Option 1 or 2 from the drop-down menu

En Stock

Available

SI TECH

Latex Wrist Seal round extra thick

61225

10.94 €

Latex cuff with extra thick round shape, specially indicated for users who carry out dives in more hostile environments.Latex seals are the most used seals on the market today, they are characterized by offering greater resistance compared to silicone seals, but their useful life is shorter since they are degraded by ultraviolet light, ozone or the...

En Stock

Available

SI TECH

Latex Wrist Seal round shape

61230

10.30 €

Standard thickness round shaped latex sleeve.Latex seals are the most used seals on the market today, they are characterized by offering greater resistance compared to silicone seals, but their useful life is shorter since they are degraded by ultraviolet light, ozone or the chemical products.Note! the price is for one unit.

En Stock

Lock Ring for the Quick Neck and/or Neck Tite system.

Available

SI TECH

Lock Ring for the Quick Neck and/or Neck Tite system.

60172

8.07 €

Lock Ring for the Quick Neck and/or Neck Tite system.

En Stock

Available

REGULATOR ACCESORIES

male/male 9/16" to 3/8" adapter

SFADT028

7.27 €

Fuera de Stock

Ask us about availability

SI TECH

Neck Tite Sitech

60.33 €

A torn neck seal can cost you the dive of your life. The Neck Tite is a modular seal/quick change system that will prevent things like that to happen. The Neck Tite system is revolutionary in simplicity, comfort and function. It ables the user to change a torn or broken seal within minutes by the use of one single tool. The Neck Tite system will save...

En Stock

Available

SI TECH

O-rings for Sitech® Dry Glove systems

3.30 €

O-rings for ANTARES, Glove QCP and Quick Glove Dry Glove System.Item no: 80173For ANTARES Dry Glove systemBlackNitrile Item no: 82038For ANTARES Dry Glove systemRedSiliconeItem no: 80197For Glove Lock QCP Dry Glove systemBlackNitrile Item no: 80185For Quick Glove Dry Glove systemBlackNitrile

En Stock

Available

ADAPTERS

One way system, male part

SF AB-09

28.02 €

The male part has a non-return valve that only allows the gas to flow in one direction. The hose connection is male 9/16 To use with this other part Do you need the service kit for this part? FOLLOW THIS LINK

En Stock

Available

REGULATOR ACCESORIES

Orientador de salidas (triplicador)

SFDY051

20.66 €

Outputs trippler to connect to the first stage and to be able to guide while tripling the 3/8" low outputs It has a 3/8 "male connection and three 3/8" female connections. Two of the female connections are oriented 90º from the connection to the first stage and the third is in a straight line.

En Stock

Available

Seals

ORUST Lock Ring

60173

7.50 €

Lock Ring for the ORUST Neck system.

En Stock

Available

SI TECH

Oval Stiff Ring

8.90 €

ANTARES Oval Stiff Ring for attachment of ANTARES to QCS Oval Item no: 60250; Old version (only for QCS Oval, does not work with ANTARES system) Item no: 60260; New, ANTARES prepared version

En Stock

Available

SPARE PARTS

Protective cap for cejn q.conn valves

21008

1.94 €

Protective cap for inflation valve studs. Option 1: Ref. 21008 standard size for Apeks and Sitech valves with universal connection (7.7mmø) Option 2: Ref. 21007 slightly bigger measure for connectors (studs) type CEJN (8.9mmø)

En Stock

Available

SPARE PARTS

PU-Ring

Sitech 60251

11.00 €

PU-Ring used in the systems: QCS Oval, ANTARES, VIRGO

En Stock

Available

SI TECH

Quick Glove

65.29 €

En Stock

Available

SI TECH

Quick Neck de Sitech

Sitech 60190

72.00 €

The flexibility of the Quick Neck is superior in comparasion to the Neck Tite, which makes it more suited for drysuits with thin fabric designs. The benefits in comfort are obvious and the movement pattern of the user is not harmed

Fuera de Stock

Out-of-Stock

Accessories

Retainer with fixed D-Ring and port (pair)

SFSTGA

16.00 €

Inner diameter of the port: 16mm

View

En Stock

Available

DECO ESSENTIALS

Rubber bands FOR S040 with handle (pair)

SFAC8046

7.50 €

Pair of rubber bands for stage and / or bailout S040 tanksIn one of the bands a practical cordura handle has been mounted to facilitate the operation of routing the hose, very useful underwater especially when we use gloves of considerable thickness.

En Stock

Rubber bands FOR S080 with handle (pair)

Available

DECO ESSENTIALS

Rubber bands FOR S080 with handle (pair)

SFAC8048

7.50 €

Pair of rubber bands for stage and / or bailout S080 tanksIn one of the bands a practical cordura handle has been mounted to facilitate the operation of routing the hose, very useful underwater especially when we use gloves of considerable thickness.

En Stock

Available

Spare parts

Rubber bands kit for harness cinch

SFSCHW

6.61 €

Kit consisting of 6 bands of bungee type fabric for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands

En Stock

Available

Rubber Hoses Plus

Rubber Inflator hosed PLUS Quality

17.36 €

A high quality hose with a perfect finish on the press bushings that prevents oxidation in case of being used in hard water environments, such as caves which, despite being fresh water, are in many cases the most aggressive for fish. metals such as brass and aluminum, due to their degrees of acidity... Finally, their perfect pressing, which gives us...

En Stock

Available

inicio

Rubber regulator hose PLUS Quality (3/8")

21.00 €

En Stock

Available

Seals

Rubber sealing tape

61370

4.12 €

Rubber tape for use in sealing the sleeves and necks of dry suits.Available in 25mm and 40mm wide. 1 meter long

En Stock

CHARGERS/BATTERIES

Saft LS14500

ls14500

7.90 €

En Stock

Available

Spare parts

Scuba Force mouthpiece

SFAC21X

4.96 €

Anatomic palatal mouthpiece

En Stock

Available

ScubaForce

Scuba Force Service Kit 2. Stage Black Devil

SFSKBD

12.00 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Sidemount Regulator Set

SFBDSS

809.09 €

The ScubaForce Sidemount regulator set is characterized by its high quality. It is uncompromisingly adapted to the sidemount dive needs. The 1st stage ScubaForce Black Devil SM has a rotatable head and an additional 5th outlet for the inflator hose. This ensures optimal hose guidance, essential for the sidemount dive. The cold water-efficient 2nd stage...

En Stock

-3.5%

Available

Reels & Spools

Scuba Force 120m Reel

SFAC-40-7

134.78 € 139.67 €

Quality and design made for the extreme: wrecks and caves! The SCUBA FORCE X-Reel with double ender - uncomplicated, reliable and long lasting. The perfect tool to implement buoys, salvage bags as well as to bridge distances in caves and wrecks.

En Stock

ADAPTERS

Scuba Force 260º regulator swivel

SFS01

41.25 €

LP 2nd Stage: 9/16-Inch Female to 9/16-Inch Male Adapter

En Stock

Available

Reels & Spools

Scuba Force 60m Reel

SFAC-40-6

123.14 €

En Stock

Available

ADAPTERS

Scuba Force 90º fixed elbow for second stage

SFS013

21.49 €

90º fixed elbow for second stage. 9/16" male/female connection

En Stock

-33%

Drysuit underwear

Scuba Force Arctic X-Nine

SFUXN

243.08 € 362.81 €

The Power-Duo!!! The ARCTIC X-NINE is currently one of the warmest drysuit undergarments on the market. The combination of two layers of Premium Elastic Fleece with an additional 400g Type B Thinsulate™ filling provides an unrivaled insulation. The Premium Elastic Fleece has many positive attributes. To begin with it is lightweight, supple, bi-elastic and...

En Stock

Scuba Force Argon tank harness for 1,5l tanks attached to 140mm tanks

Available

DRYSUIT INFLATOR SYSTEMS

Scuba Force Argon tank harness for 1,5l tanks attached to 140mm tanks

SFARDG15140

23.97 €

Attachment for mounting 1.5l aluminum drysuit inflation tanks to 140mm diameter tanks (5l, 7l, 8l long, 8.5l)

En Stock

Scuba Force Arnes botella Argon 1,5l de anclaje a la botella (171mm)

Available

DRYSUIT INFLATOR SYSTEMS

Scuba Force Argon tank harness for 1,5l tanks attached to 171mm tanks

SFARDG15171

23.97 €

Attachment for mounting 1.5l aluminum drysuit inflation tanks to 171mm diameter tanks (12l long, 10l and 8l short)

En Stock

Available

DRYSUIT INFLATOR SYSTEMS

Scuba Force argon tank straps (0,85l)

SFARBP085

23.97 €

The Scuba Force harness for the dry suit inflation systems is made with highly balanced harness straps, we dare say that it is "the most balanced" on the market, between hardness and softness to facilitate handling. It also has a piece of rubber that increases the grip of the set with the tank. NOTE: TANK IS NOT INCLUDED!!!

En Stock

Available

DRYSUIT INFLATOR SYSTEMS

Scuba Force argon tank straps 1,5L

SFARBP15

23.97 €

En Stock

Drysuit underwear

Scuba Force Basic Top M size

SFUXB-M-outlet

45.45 €

The ARCTIC X-BASIC is a single-layer drysuit undergarment made of Full Stretch Power Fleece. This material combines many positive features, such as lightweight, supple, bi-elastic and highly breathable. In addition, it is machine-washable and provides a high wind

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Black Devil LONG Backplate

BPBDL

144.63 €

It is the extra long version of the Black Devilf ScubaForce backplate. With the same characteristics as the original but longer, is especially suitable for especially high users and for the assembly of some rebreathers which needs this extra height, such as for example the Meg or the KISS Classic Its total height is 48cm Its weight, 2.9Kg Manufactured...

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Black Devil LONG/HEAVY Backplate

BPBD6

247.11 €

It is the extra long and heavy version of the Black Devilf ScubaForce backplate. With the same characteristics as the original but longer and heavier, is especially suitable for especially high users who could need more fixed lead and for the assembly of some rebreathers which needs this extra height, such as for example the Meg or the KISS Classic Its...

En Stock

Available

ScubaForce

Scuba Force Black Devil PRO 1st Stage

SF808T

230.58 €

The SCUBA FORCE high-performance regulators are tested under the harshest conditions around the world.They are the best choice for anyone looking for reliability and comfort.In addition, the regulators offer sophisticated design and optimal configuration possibilities.

Fuera de Stock

Ask us about availability

ScubaForce

Scuba force Black Devil Regulator 2nd Stage

123.14 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Black Devil Set Deluxe Grey

SFBDSD-23

495.04 €

One Size Fits All This is an ingenious system that has it all. The shoulder, abdominal and crotch straps offer extensive length adjustment so it can be easily adjusted from XS to XXL. Secured at multiple points the harness remains stable and secure.

En Stock

Available

ScubaForce

Scuba Force Black Devil Set Deluxe Red

SFBDSD-1

495.04 €

En Stock

Available

ScubaForce

Scuba Force Black Devil Skeleton Backplate

BPBD

123.14 €

The ScubaForce Black Devil Skeleton Backplate combines design with a maximum of convenience. Its shape is directly inspired by high quality backpacks. Weight: 2,3 kg (5.07 lbs) Material: stainless steel 3 mm (0.12“), powder-coated. Lenght: 41cm (16.14")

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Black Devil SM 1st Stage

SFD2GFA01D

205.79 €

En Stock

Available

ScubaForce

Scuba Force Black Devil TECH 1st Stage

SFFS850D

180.99 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Blade Backplate, aluminium

SFSMBP-ALU

164.46 €

Based on the proven shape of the SCUBA FORCE Black Devil Plates, we have created a sidemount plate that offers maximum freedom of movement and maximum stability due to its shape. Not just for sidemount CCR divers a perfect choice. The BLADE sidemount plate comes in black and red and in aluminum and high quality stainless steel. And here, too, German...

Fuera de Stock

Scuba Force Blade Backplate, stainless steel

Ask us about availability

ScubaForce

Scuba Force Blade Backplate, stainless steel

164.46 €

En Stock

Available

Harness

Scuba Force blade harness parts

12.40 €

Parts to mount the Scuba Force Blade harness, or to mount your own harness...Made of high quality marine grade stainless steel.Choose the required parts from the drop-down menu (the top part or the bottom one) NOTE: the price corresponds to only one piece, top or bottom, the picture shows both for illustrative purposes

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Canister

BRIGHT Canister

809.09 €

BRIGHT Battery Features Material: Anodized aluminum (head) and Delrin Control: Piezo switch. Three-level dimming: 23.8 Ah (257 Wh) capacity Battery: Lithium-ion, 3S7P Runtime: 210 min (100%), 419 min (50%) Weight: 1740 gr Length: 250 mm Size with bend protection: 310 mm Length E/O cord: approx. 90 cm Color: Black Scope of delivery: BRIGHT Canister with...

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright DUO Canister

BRIGHT DUO Canister

1,032.23 €

BRIGHT DUO Battery Features Material: Anodized aluminum (head) and Delrin Control: Piezo switch x 2. 2 x Three-level dimming: 23,8 Ah (257 Wh) capacity Battery: Lithium-ion, 3S7P Runtime: 210 min (100%), 419 min (50%) Weight: 1870 gr Length: 250 mm Size with bend protection: 310 mm Length E/O cord 1: approx. 90 cm Length E/O cord 2: approx. 40 cm Color:...

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright DUO Set

Bright DUO Set

1,445.45 €

Scuba Force offers us a strong construction Scuba light system, resistant to the harsh conditions to which our diving material is exposed, combined with the application of the most advanced technology applicable to underwater lighting systems. The result is a very high-performance lighting system, perfect for any type of diving we practice, no matter how...

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Flight Canister

BRIGHT FLIGHT Canister

577.69 €

BRIGHT Battery Features Material: Anodized aluminum (head) and Delrin Control: Piezo switch. Three-level dimming: 6.8 Ah (73 Wh) capacity Battery: Lithium-ion, 3S7P Runtime: 60 min (100%), 30 min (50%) Weight: 935 gr Length: 130 mm Size with bend protection: 185 mm Length E/O cord: approx. 90 cm Color: Black Scope of delivery: BRIGHT Canister with E/O...

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Flight Set

Bright Flight Set

825.62 €

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Light

BRIGHT LIGHT lamp head

412.40 €

BRIGHT LIGHT Head Features LED: CREE XHP70 4.000 lumen Beam angle: 8° Material: Anodized aluminum and Delrin Control: Piezo switch Three-level dimming: 23.8 Ah (257 Wh) Weight: 480 gr Length: 80 mm Size with bend protection: 140 mm Diameter: 55 mm Color: Black Scope of delivery: Lamp head, Goodman Handle, Protection bag

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Light Set

BRIGHT Set

1,114.88 €

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Sidemount Canister

BRIGHT SIDEMOUNT Canister

824.79 €

BRIGHT Sidemount Battery Features Material: Anodized aluminum (head) and Delrin Battery Head with angle connection Control: Piezo switch. Three-level dimming: 23.8 Ah (257 Wh) capacity Battery: Lithium-ion, 3S7P Runtime: 210 min (100%), 419 min (50%) Weight: 1740 gr Length: 250 mm Size with bend protection: 310 mm Length E/O cord: approx. 90 cm Color:...

Fuera de Stock

Ask us about availability

inicio

Scuba Force Bright Sidemount Set

Bright Sidemount Set

1,156.20 €

Fuera de Stock

Scuba Force Camband Stainless Steel Buckle Type II

Ask us about delivery time

COMPLEMENTS

Scuba Force Camband Stainless Steel Buckle Type II

SFAC612

32.23 €

En Stock

Available

STEEL HARDWARE

Scuba Force Cobra GT Buckle female

FG50MWF

12.40 €

The GT Cobra high strength polymer buckle system. designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf/2,2kN, the GT cobra buckle is a 100% Polymer system with no metal components.

En Stock

Hebilla Cobra GT ajustable (macho), Scuba Force

Available

STEEL HARDWARE

Scuba Force Cobra GT Buckle male, adjustable type

FG50MMV

10.33 €

En Stock

Scuba Force Cobra GT Buckle male, fixed type

Available

STEEL HARDWARE

Scuba Force Cobra GT Buckle male, fixed type

FG50MMF

10.33 €

En Stock

Available

Reels & Spools

Scuba Force Cold Water Spool 30 Meter

SFFMCE30W

20.66 €

The Scuba Force Spool for cold waters has a central hole of generous dimensions which makes it perfect for handling while using thick gloves and of course, also without them. Features: 30m of white thread Center hole diameter, 30 mm Total diameter, 78 mm Width 55 mm Includes double stainless steel carabiner.

En Stock

Available

REELS, WETNOTES, BUOYS...

Scuba Force Deluxe Wetnotes

sfac369

23.97 €

Offers a lot of Space for Drawings, Run Time Tables as well as Communication with your Diving Partner.

En Stock

Available

STEEL HARDWARE

Scuba Force double snap

6.20 €

Double stainless- steel snap Stainless-steel double end snap, all-round use for fastening various equipment. Available in two sizes: M: 100mm L: 117mm

En Stock

Available

Dry Suit Bags-Hangers

Scuba Force drysuit bag

SFDSB

32.23 €

The Scuba Force carrying bag is an innovative concept that allows for a great method of storing and transporting your drysuit and then once at the dive site, opens to reveal a great changing mat for on-the-go convenience.

Fuera de Stock

Ask us about availability

inicio

Scuba Force Explorer NST Made to Measure

EXPLORER NST - MTM

1,652.07 €

Don't you fit perfectly in the standard measurements of Scuba Force drysuits? Do you prefer that the suit be made just to your measurements and preferences? this is the option of custom made Scuba Force suits. Undoubtedly, the best choice when purchasing a suit of this level of quality and finishes, which will accompany us for many years. Contact us to...

Fuera de Stock

Ask us about availability

dry suits

Scuba Force Explorer NST, Men

1,362.81 €

With the EXPLORER NST, SCUBA FORCE presents a unique dry suit which is produced in a completely new method. After more than three years of developmental work and in cooperation with a high-tech machinery company from Germany, we are now very proud to introduce the SCUBA FORCE NO STITCH TECHNOLOGY drysuit. SIZE CHART

Fuera de Stock

Ask us about availability

dry suits

Scuba Force Explorer NST, women

1,362.81 €

Fuera de Stock

Ask us about availability

inicio

Scuba Force Goodman Handle

SFGOODMAN

41.31 €

Goodman type handle made of Delrin and aluminum, fully adjustable and foldable to transport it without risk of breakage. Side with shape to accommodate the thumb. It has two pass-through holes to mount the bungee Max opening size: 107mm wide x 55mm high Minimum opening measurement: 60mm wide x 35mm high Weight 120gr Includes stainless steel screws,...

En Stock

Available

ScubaForce

Scuba Force Inox Tank strap

sfac611

31.32 €

En Stock

Available

Knifes & Cutters

Scuba Force Line Cutter

SFLC

27.27 €

Scuba Force Line Cutter is a very useful, almost essential tool. Compact, easy to reach, ergonomic and lightweight (100 grams).Key features: Blade: Crucible Stainless Steel Handle: Micarta Cloth Resin Total Length: 150 mm Length of Blade: 48 mm Thickness of Handle: 10 mm Width of Handle: 24 mm Blunt Tip

En Stock

Available

REGULATOR ACCESORIES

Scuba Force LP Hose Splitter

SFAD30

24.79 €

LP Hose Splitter • Allows the attachment of two low pressure regulator hoses (first stage ends)• One 9/16-18 male inlet to two 3/8-24 female outlets• Chromed brass construction• Low pressure only

En Stock

Available

Accessories & spare parts

Scuba Force Mask Strap

SFMBN

8.26 €

Adjustable Mask Strap

Fuera de Stock

Ask us about availability

Pressure Gauge

Scuba Force Metall SPG 300bar Black

SFSPG52300bk

41.24 €

The SCUBAFORCE pressure gauges are made of high quality brass and chrome offering perfect protection against corrosion. The brass case with tempered glass offer extreme durability and can be used with or without the rubber housing, which is particularly appreciated by technical divers. The double-welded Bourdon-Beryllium tube offers a high degree of...

En Stock

CONTROL INSTRUMENTS

Scuba Force Metall SPG 300bar white

SFSPG52300

45.45 €

En Stock

Scuba Force Neoprene Drysuits Hood - 5mm

Available

Hoods

Scuba Force Neoprene Drysuits Hood - 5mm

57.02 €

Scuba Force hood for drysuit. Its wide neckskirt allows us to make the entire part of the neck even more watertight, giving us more comfort and warmth than conventional hoods.It has a perimeter seal around the face to prevent the entry of water. The perforations in the upper part allow the evacuation of the accumulated gas.

Fuera de Stock

Scuba Force Neoprene Drysuits Hood - 8mm

Ask us about availability

Hoods

Scuba Force Neoprene Drysuits Hood - 8mm

SFKH8

65.29 €

Fuera de Stock

Ask us about availability

Dry Suit Bags-Hangers

Scuba Force Percha Multiusos

EQHBE

15.70 €

The Scuba Force hanger is ideal for storing your BCD and regulators when you are not diving. It´ s specifically designed for the storage of dive equipment.

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Powerlight II

SFBL II

90.91 €

Compact and powerful handlight. Scuba Force presents this handlight/backup light with a medium open beam of light selectable in three powers, a perfect tool to use as a main and / or backup light, given the high autonomies that we can achieve according to selected power.

En Stock

CONTROL INSTRUMENTS

Scuba Force Pro Compass with Bungee Mounts

SFKBLP

53.72 €

The SCUBA FORCE Compass Pro is a high quality liquid-filled Diving Pro Compass with bungee mounts.

En Stock

Available

ScubaForce

Scuba Force Recreational Regulator Set I

SFBDRS

428.93 €

he ScubaForce regulators provide excellent breathing and perfect performance in cold water as well as offering optimal configuration options for different applications. The sets are available completely configured with Scubaflex hoses and come with a regulator bag.

En Stock

Available

ScubaForce

Scuba Force Recreational Regulator Set II

SFBDRSII

453.72 €

The ScubaForce regulators provide excellent breathing and perfect performance in cold water as well as offering optimal configuration options for different applications. The sets are available completely configured with Scubaflex hoses and come with a regulator bag.

En Stock

Available

ScubaForce

Scuba Force Recreational Regulator Set III

SFBDRSIII

453.72 €

En Stock

-3.8%

Available

Regulator bags

Scuba Force regulator bag

SFBG8563

31.01 € 32.23 €

Scuba Force Deluxe Regulator Bag is perfect for keeping your regulators neat, tidy and protected. Great to use when travelling with your regs and other instruments. NOTE: the regulator are not included

En Stock

Available

ScubaForce

Scuba Force Service Kit 1. Stage Black Devil SM

SFSKSM

23.97 €

En Stock

Available

ScubaForce

Scuba Force Service Kit 1. Stage Black Devil TEC

SFSKTEC

21.79 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force SS standard Backplate

BPSBD

106.61 €

The ScubaForce Standard Steel Backplate has a material thickness of 3 mm (0.12") and a total weight of 2,3 kg (5.07 lbs). It is made of saltwater resistant, stainless steel. Optimal positioning of the double tanks using the combination of the 3 holes and the lower slot. Holes in regularly spaced intervals enable you to fix your Argon-Set or other...

En Stock

Available

DECO ESSENTIALS

Scuba Force Stage Rigging Kit

40.50 €

The ScubaForce Stage-Rigging Kit has a high-quality pipe clamp with a screw thread made of saltwater-resistant stainless steel. The clamp can be adjusted centimeter-accurately over the clamping cap by means of a simple screwdriver. Simple and bomb-proof. The clamp is surrounded by a water-resistant Dyneema hose and protects the bottles as well as the...

En Stock

Available

ScubaForce

Scuba Force standard Alu Backplate

BPSBDA

123.14 €

material thickness of 3 mm (0.12“) and a total weight of 0,7 kg (1.54 lbs). Thanks to its minimal weight it is your ideal companion. It is especially suitable for travelling by plane. The hole pattern on the backplate allows you to secure your equipment for the optimal position and security. Lenght: 40 cm (15.75")

En Stock

Available

Care & reparations

Scuba Force Talcum

SFTAL

3.72 €

Absolutely essential for the care of latex sleeves and advisable to apply in areas of friction of the diver himself, such as the neck and wrist.Scuba Force Talcum does not contain additional additives, just talcum powder.The presentation in a canister with dispenser makes the task of applying much more precise than with traditional canisters.100gr of...

En Stock

Available

REELS, WETNOTES, BUOYS...

Scuba Force Tec SMB

40.50 €

A plus for your diving safety and not only for TECHIES. High quality seams (ultrasonically welded - sewn on edge) combined with excellent features. The TEC SMB can be inflated orally or by a non-locking BC inflator hose. Even in heavy seas air cannot escape from the closed SMB. The narrow design makes both stowing and handling easy.

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Twin Tec Set I

SFBDTTS

809.09 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force Twin Tec Set II

SFBDTTSII

709.92 €

Fuera de Stock

Ask us about availability

Transport bags

Scuba Force Ultimate Bag

SFUDB1

106.61 €

Ideal Travel Bag with Large Volume & Versatile. Made of Ultra Robust, Low Weight, Water-repellent Material

En Stock

SCUBA Mask

Scuba Force Vision II Blue Mask

sfviimbl

48.76 €

Called the best fitting dive mask on the market, SCUBA FORCE VISION II is one of the most popular dive masks in the world. The dual lens design of SCUBA FORCE´s VISION II offers a low volume and provides excellent field of view, both horizontally and vertically. All VISION II are coming with a comfortable and adjustable neoprene mask strap.

En Stock

Available

Care & reparations

Scuba Force Wax

WAX

4.55 €

Scuba Force hight quality Wax Lubricates & protects all types of dry suit zips- regular use will assist in ease of dry suit use & prolong the lifespan of zip fasteners .

En Stock

Available

Accesories / Weight

Scuba Force Weight Pockets

SFWP500

81.82 €

This compact weight system is made of robust Cordura and consists of two outer pockets and two integrated weight pockets that are secured by wide Fastex buckles that offer great security with simple operation – even while wearing thick gloves. With this system, you are ready for every type of diving. Flap pocket: the inner bag is secured by a wide Fastex...

En Stock

-33%

Drysuit underwear

Scuba Force X-Basic

99.11 € 147.93 €

En Stock

-20%

inicio

Scuba Force X-Hood

SFXHSM

16.53 € 20.66 €

A beanie which not only looks good, but also keeps you warm! Made of Full Stretch Power Fleece.

En Stock

-30%

Drysuit underwear

Scuba Force X-Pure

SFUXPU

230.83 € 329.75 €

The ARCTIC X-PURE is an incredibly versatile and highly adaptable undergarment. In milder water temperatures, the X-PURE is an excellent choice to wear under your trilaminate drysuit and in colder water, the ARCTIC X-PURE works well in combination with the ARCTIC X-BASIC for the perfect layering to keep you warm.

En Stock

-30%

Drysuit underwear

Scuba Force X-Sox

SFAS

20.25 € 28.93 €

The best solution for really warm feet. Made of our proven undergarment material. Fully elastic and breathable. Two layers TecnoStretch® guarantee a perfect fit and high insulation properties. X-SOX are unique, they keep particularly warm and support a balanced buoyancy due to the low lift. Produced from 2 layers 300 'TECNOSTRECH® Anti-allergic, wind...

En Stock

-30%

Available

dry suits

Scuba Force Xpedition exposure unit

XPEDITION-L-Expo

1,040.74 € 1,486.78 €

The suit has been on display in the store for 7 months (since April 2022) and only a few specks of dust could be seen. It is obviously in perfect condition. Size: L

Fuera de Stock

Ask us about availability

inicio

Scuba Force Xpedition Made to Measure

XPEDITION - MTM

1,734.71 €

Fuera de Stock

Ask us about availability

inicio

Scuba Force Xpedition SE Made to Measure

XPEDITIONSE - MTM

1,817.36 €

Fuera de Stock

Ask us about availability

dry suits

Scuba Force Xpedition SE, Men

1,652.07 €

The development of the SCUBA FORCE Xpedition SE focused on two requirements: maximum protection with maximum flexibility. The SCUBA FORCE "Double Seal Technology" in which all seams are sealed and double sealed with a machine-applied hotmelt tape, convinced even with its predecessor the Xpedition. Size Chart

Fuera de Stock

Ask us about availability

dry suits

Scuba Force Xpedition SE, Women

1,652.07 €

Fuera de Stock

Ask us about availability

dry suits

Scuba Force Xpedition, Men

1,486.78 €

The Scuba Force Xpedition Drysuit reach a new dimension in dry diving, Agility meets durability together at the same drysuit. In cooperation with our material supplier, Fothergill Polycom, we have developed a dry suit that sets new standards. SIZE CHART

Fuera de Stock

Ask us about availability

dry suits

Scuba Force Xpedition, Women

1,486.78 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Blade Comfort harness

SF49DI0728

164.46 €

Scuba Force Blade Comfort harness ...for those who like it a bit more comfortable

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Blade Comfort set

SFBSC

478.51 €

The Blade Comfort set consists of the Blade wing and the Blade Comfort harness. An adjustable harness mounted with Cobra adjustable and safety buckles, shoulder pads to provide extra comfort and the Blade Soft Pad, all pre-assembled. Click here for more information about the wing Click here for more information about the harness

Fuera de Stock

-30%

Out-of-Stock

ScubaForce

Scuba Force, Blade Comfort set (expo item)

SFBSC-expo

334.96 € 478.51 €

Brand new exhibition equipment. Having been displayed in the shop window for a while (WITHOUT exposure to the Sun), it has accumulated dust, which will disappear on the first dive we do with it. The Blade Comfort set consists of the Blade wing and the Blade Comfort harness. An adjustable harness mounted with Cobra adjustable and safety buckles, shoulder...

View

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Blade Pure harness

SF49DI0730

48.76 €

...for the sidemount purists The BLADE system can also be combined with a PURE Harness. Our aimed is at the purist of sidemount divers, the minimalistic sidemount diver. The BLADE Pure Harness is configured via an upper and lower plate.UPPER AND LOWER PLATE The BLADE wing is simply attached to the plates via two bookscrews. As simple as it gets: The BLADE...

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Blade Soft Pad

49DI0727

57.02 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Blade wing

49DI0726

263.64 €

Made of a ballistic Cordura material, the outer shell provides maximum abrasion resistance and yet is flexible enough to streamline and fit firmly around the diver. The inner bladder is made of rugged nylon and thus offers additional protection against damage. The fittings for the inflator and the dump valve are ultrasonically welded to the bladder making...

En Stock

Available

pee-valve, condoms, quick connec

Scuba Force, Pee-valve

SFPV

106.61 €

The Scuba Force Low Profile P-valve is one of the most effective valves on the market. It's balanced design and its large diaphragm, makes it easy for anyone to use, all you have to do is connect it and think only in your dive... An essential tool for anyone who spend a lot of time underwater.

En Stock

Available

ScubaForce

Scuba Force, Service Kit 1 Stage Black Devil Pro

SFSKBDP

32.00 €

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Set Blade Pure

Blade Pure

371.07 €

...for the sidemount purists The BLADE system can also be combined with a PURE Harness. Our aimed is at the purist of sidemount divers, the minimalistic sidemount diver. The BLADE Pure Harness is configured via an upper and lower plate.The BLADE wing is simply attached to the plates via two bookscrews. As simple as it gets: The BLADE PURE! Click here for...

Fuera de Stock

Ask us about availability

ScubaForce

Scuba Force, Set Blade Tech

SFBST

437.19 €

Just like the comfort harness, the BLADE TECH harness is mounted directly on the soft pad. Thus, the same comfortable weight integration system is available. At the front, however, the BLADE TECH reveals its field of application, this is about technical diving with the highest loads. Click here for mor wing info Click here for more harness info

En Stock

Available

ScubaForce

Scuba Force, single tank adapter

SF55007

48.76 €

The single tank adapter is made of stainless steel that is resistant to saltwater as well. It serves to mount a mono device to a backplate. Its weight is: 330gr Made of staliness steel, 2mm thickness Dimensions: 30,5cm x 6,5cm Distance between screw holes: standar 28cm center to center The complete screw set is included

En Stock

Available

Scuba Force

ScubaFlex, regulator hose, white

MLPH-210-WHITE-

20.66 €

Our SCUBAFLEX hoses offer a high degree of flexibility and can be perfectly configured because they have no twist at all.The metal connections are produced on the most accurate way and can be easily connected.

Fuera de Stock

Ask us about availability

ScubaForce

ScubaForce Black Devil 32 lbs

247.11 €

This two-shell donut wing with 15 liters lift (approx. 32 lbs buoyancy) is made of high quality materials and is particularly functional by its good handling.

En Stock

Second stage male part quick connection system

Available

ADAPTERS

Second stage male part quick connection system

SF S-03-4M

9.09 €

Second stage part of the quick connection system TO USE WITH THIS OTHER PART

Fuera de Stock

Ask us about availability

inflation and exhaust valves

Service kit for Sitech Exhaust Valves

Si-Tech 11395

14.88 €

This service kit includes all necessary parts for maintenance of all SI TECH Exhaust Valves. Note! All service of SI TECH valves shall be performed by a qualified service technician. This service kit includes: Piston (item no: 11010) - 1 pcs Check valve (item no: 11003) - 1 pcs Guide sleeve (item no: 11030 - 1 pcs Membrane (item no: 10005) - 1 pcs Spring...

En Stock

Available

inflation and exhaust valves

Service kit for Sitech Inflation Valves

Si-Tech 21120

14.36 €

This service kit includes all necessary parts for maintenance of all SI TECH Inflation Valves with push button. Note! All service of SI TECH valves shall be performed by a qualified service technician. Parts included: SI TECH logo ref. 20928- 1 pc Rubber seat ref. 20004 - 1 pc Intake circle ref. 24513 - 1 pc O-ring ref. 80001 - 1 pc O-ring ref. 80002- 1...

En Stock

Service kit for Sitech Slide Inflation Valves

Available

inflation and exhaust valves

Service kit for Sitech Slide Inflation Valves

Si-Tech 21125

10.74 €

This service kit includes all necessary parts for maintenance of SI TECH Inflation Valves with slide button. This service kit includes: Intake circlip (item no: 24513) - 1 pcs O-ring (item no: 80150) - 1 pcs O-ring (item no: 80000) - 1 pcs O-ring (item no: 80198) - 1 pcs Note! All service of SI TECH valves shall be performed by a qualified service...

En Stock

Available

ADAPTERS

Service Kit One Way Valve

SF AB-09 SERV

4.94 €

Service kit to use with this part: LINK

En Stock

Available

ADAPTERS

Service Kit Quick Disconnect female

SF AB-04 SERV

2.40 €

Service kit to use with this part: LINK

En Stock

Available

SI TECH

Si Tech ANTARES + QCS OVAL Latex

60602

105.15 €

En Stock

Available

SI TECH

Si tech ANTARES + QCS OVAL Silicone

60600

100.90 €

En Stock

Available

SI TECH

Si Tech ANTARES NEW VERSION UPDATE

Si-Tech 60610

53.07 €

En Stock

Available

pee-valve, condoms, quick connec

Si Tech Pee-Valve

Si-Tech 11920

73.55 €

Extend your bottom time using a SI TECH Pee Valve. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit Features: Pressure compensated. Twin checkvalves for safe evacuation and no outer leakage. ON/OFF valve for easy manouever....

En Stock

Available

SI TECH

Si tech QCS Oval (new version)

60918

56.06 €

The QCS Oval enables quick change of torn or broken seals. This modular solution offers the user to choose from a variety of seals and sizes. The change is made in a few minutes. The QCS Oval has a oval and narrow design which decreases volume and bulk.

En Stock

Available

SI TECH

Si tech QCS Oval (old versión)

60916

56.06 €

The old version of the QCS Oval system is ideal if it is clear that the assembly of dry gloves will not be necessary. This version has a slightly shorter cuff fixing ring than the new QCS system and DOES NOT WORK with dry gloves systems. The QCS Oval provides the user with the opportunity of quickly changing a torn or broken seal. It also offer a...

En Stock

SI TECH

Si tech Quick Cuff

50.88 €

The Quick Cuff modular system is one of preferred by users as it not only allows us change the wrist seals by ourselves but also allows assemble the Glove Lock QCP and Quick Glove dry glove systems, both of which are contrasted safe and easy to use.

En Stock

Si-Tech Boot Connection Modular Quick Change Solution

Available

SI TECH

Si-Tech Boot Connection Modular Quick Change Solution

60470

37.19 €

his system allows us to be able to assemble and disassemble the boots of our dry suit in a few minutes. This is very useful in cases of requiring the use of different types of boots depending on the work to be done or, the replacement of the boot and / or sock when it needs repair and without the need to send the complete suit to the workshop and be able...

En Stock

Available

Seals

Si-Tech Melco Tape T5500 22mm

61372

3.20 €

Sitech Melco T 5500 22mm sealing tape is used for dry suit arrangements. It is of great quality and easy application. Its docility makes it perfect to be able to handle it and apply it correctly on site. In addition, its exterior texture adds a touch of quality to the finish. The tape is sold in 50cm sections. likewise, the price corresponds to a 50cm...

En Stock

Available

inicio

Si-Tech Wax / Paraffin

61357-50

5.30 €

Wax/paraffin for drysuit zippers and Quick Glove Dry Glove system.

Fuera de Stock

Out-of-Stock

SI TECH

Si-Tech Wax / Paraffin (soap bar shape)

61357

4.95 €

Specific Sitech paraffin wax for application on the zippers of dry and semi-dry suits and on the entry surfaces of Sitech dry glove systems. Soap bar shape 80 x 45 x 20 mm

View

En Stock

Available

STEEL HARDWARE

Sidemount tank holder

FB108X45X2

8.26 €

45 x 105mm

En Stock

Available

SPARE PARTS

Sitech ANTARES Support Ring

60266

2.43 €

The Support Ring solves locking problems that might occur when the ANTARES Dry Glove System is mounted in drysuits with short arm lengths or when the ANTARES user is wearing heavy duty undergarments.The Support Ring will guide the latch arms of the ANTARES Glove Ring on its path towards the locking grooves of the ANTARES Oval Stiff Ring. It will at the...

En Stock

Available

inflation and exhaust valves

Sitech Argo Exhaust valve

40.93 €

En Stock

Available

inflation and exhaust valves

Sitech attach tool for dump valves

18417

29.00 €

Specific tool to attach the Sitech dump valves. It is composed of two parts and made of resistant Delrin The models that require this tools are: Sitech on/off valve Sitech Cuff Dump Valve Sitech low profile Dump valve Sitech String Dump Valve Sitech Pee-Valve

En Stock

Available

SI TECH

Sitech Combi Tool

60165

14.44 €

TECHNICAL SPECIFICATION The Combi tool simplifies handling of the most common drysuit components manufactured by SI TECH: Tightening/detachment of drysuit Valves and Dump Valves Attachment/detachment of neck seal in the Quick Neck system as well as the Neck Tite system Detachment of wrist seal in the QCS Oval system Combi tool Manual movie:...

En Stock

Available

SI TECH

Sitech Cuff Dump Valve

13300

15.70 €

Non adjustable (not spring loaded). One way flow Dump Valve without any adjustment. Controlled by Check valve. No On / Off function. Designed to fit SI TECH Valve ports. (Valve port is not included).SI TECH does not recommend this valve as the only valve on drysuits. Dump Valves should be used in combination with a SI TECH Exhaust Valve.

En Stock

Available

SI TECH

Sitech Equalization tube

Sitech 60233

1.75 €

Equalization tube for Dry Glove systems. Equalization tube should be used to allow air to flow between the suit and the glove during the dive. NOTE: the price is for only on tube

En Stock

Available

SI TECH

Sitech Glove Lock QCP

60520

100.00 €

Glove Lock QCP is a heavy duty Dry Glove System for professional-, technical- as well as recreational divers. Glove Lock QCP can be used with Quick Cuff for those who wants the possibility to change wrist seals instantly. The Glove Lock QCP can be fitted directly on latex seals also. Manual Note! Gloves not included!

En Stock

Available

SI TECH

Sitech Glove Lube

60540

5.70 €

Glove Lube for lubrication of ANTARES and Glove Lock QCP Dry Glove system.

En Stock

Available

SI TECH

Sitech Latex Wrist Seal

6.72 €

Latex Wrist Seal with bottleneck shape and standard sleeve circumference. Available in four sizes: X-small, Small, Medium and Large

En Stock

Available

inflation and exhaust valves

Sitech Male nipple

6.56 €

TECHNICAL SPECIFICATION Available in Int´l and CEJN type versionAvailable in two Int´l versions (one for Shell/Skeleton Inflation Valve and one for Slide Inflaton Valve) O-ring is included Item no: 25207: Int´l, for Shell Inflation Valve (NOT LONGER AVAILABLE, HAS BEEN REPLACED BY ITEM. 21101) Item no: 21101: Int´l, for Shell Inflation Valve Item no:...

En Stock

SI TECH

Sitech NEVA

60760

86.67 €

NEVA is a round "pull over" Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. NEVA is an easy to use Dry Glove System, designed to perform - no matter the diving environment. The glove can be secured with an o-ring. CONTENTS LIST OF THE SET

En Stock

Available

SI TECH

Sitech Old QCS version update to ANTARES

60620

54.96 €

En Stock

Available

SI TECH

Sitech Quick Clamp

Sitech 60930

19.09 €

Docking system for latex seals xed to the suit. Quick Clamp makes your drysuit compatible with the Quick Glove system. Attaches to the latex seals of the drysuit without tools or glue. Comes with a variety of Spanner Rings suited for a variety of seals. Instructions manual (1a):

En Stock

Available

SPARE PARTS

Sitech Quick Cuff Stiff Ring

Sitech 60200

7.15 €

Quick Cuff seals base

En Stock

Available

SPARE PARTS

Sitech Quick Cuff Wrist Ring (PU-Ring)

Sitech 60420

8.61 €

PU-Ring used in the systems Quick Cuff

En Stock

Available

inflation and exhaust valves

Sitech Shell Inflation Valve

40.93 €

En Stock

Available

SI TECH

Sitech Silflex wrist Seal

8.26 €

Extremely flexible - tremendously increased well being, one size fits a wide range of wrists. Less sizes to stock. Less strain to wrist. Great material stability - better against ageing and UV light. Better for allergies. Less friction (antifriction coat on the inside). Two sizes and two colors available NOTE! The price (9,2€) is for ONLY ONE UNIT and...

En Stock

Available

SI TECH

Sitech Silicone Neck Seal

22.58 €

En Stock

Available

inflation and exhaust valves

Sitech Skeleton inflation valve

46.89 €

Two options available 21780 ref.: hight push button 21730 ref.: low profile botton

En Stock

Available

SI TECH

Sitech SLÄGGÖ PU RIng

60710

10.05 €

En Stock

Available

SI TECH

Sitech Slide inflation valve

39.73 €

The Slide Inflation Valve is a high performance valve suitable for all areas of recreational and technical diving. The design of the housing makes it easy to locate and the slide button ables the diver to inflate a smooth flow of gas and fully control the buoyancy. The construction of the filter lid makes the Slide Inflation Valve suitable to use in...

En Stock

Spare parts

Sitech String Dump Valve

13350WN

30.00 €

Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut.

En Stock

Available

inflation and exhaust valves

Sitech Thetis exhaust valve

40.93 €

En Stock

Available

pee-valve, condoms, quick connec

Sitech TRIGON, Pee-Valve

114.75 €

Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit!

En Stock

Available

pee-valve, condoms, quick connec

Sitech TRIGON, Pee-Valve Tube

11951

17.02 €

En Stock

Available

inflation and exhaust valves

Sitech Valve Attachment Tool (1 unit)

Sitech 18222

7.36 €

Valve Attachment Tools are recommended to enhance the grip when detaching and/or reattaching SI TECH valves and Blanking plug. Note! Sold in pcs, not a pair. Two pcs are needed for most valves.

En Stock

Available

SI TECH

Sitech Weld nut

11032

6.34 €

This Weld nut is intended for welded attachment of valves. The Weld nut demands an O-ring for proper sealing properties. (O-ring item no: 80088 included.) TECHNICAL SPECIFICATION PU Outer diameter: 64 mm Inner thread: M33 x 1,5 Fits all SI TECH valves Note: the color could be black or translucent white. The two sides of the port are shown, the price...

En Stock

Available

SI TECH

Sitech, Anti-friction washer

11016

2.44 €

Anti-friction washer for Inflation and Exhaust Valves. TECHNICAL SPECIFICATION Outer diameter: 64 mm Inner diameter: 33,5 cm For all Inflation and Exhaust Valves

En Stock

Available

SI TECH

Sitech, external rubber valve port

60805

9.12 €

External Valve port for attachment to trilaminate- and rubber drysuits. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves NOTA: La imagen muestra las dos caras del asiento, el precio mostrado corresponde a un asiento.

En Stock

Available

SI TECH

Sitech, external valve port 75mmø

60885

5.36 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 75 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

inflation and exhaust valves

Sitech, external valve port 85mmø

60895

4.64 €

This Valve port can either be glued or welded to trilaminate drysuits. TECHNICAL SPECIFICATION Polyurethane Outer diameter: 85 mm Inner diameter: 33 mm Dual groove Fits all SI TECH valves

En Stock

Available

SI TECH

Sitech, External Valve port with flange

60810

6.34 €

External Valve port for attachment to neoprene drysuits. Valve ports with elevated rear flange are designed to be attached in a hole that is just a little smaller than the flange and the neoprene is to be glued onto the flange. TECHNICAL SPECIFICATION Neoprene rubber Outer diameter: 100 mm Inner diameter: 33 mm Dual groove Elevated rear flange Fits all...

En Stock

Available

SI TECH

Sitech, Inner Glove, Kleven

9.38 €

Kleven Inner glove is a thin and flexible inner glove with very good thermal capability. Knitted with polyester hollow fiber (97 %) and spandex (3 %). Advanced materials and deliberate design ensures the best heat insulation and a faster drying time than comparable materials. Short cuff. Tight around the wrist (low risk of getting stuck in locking...

En Stock

Available

SI TECH

Sitech, Internal Valve Port

60852-cut

3.02 €

Internal valve port used in the installation of Sitech valves.

En Stock

Available

SI TECH

Sitech, ORUST neck ring

60174

24.17 €

Neck Ring for the ORUST Neck system.

Fuera de Stock

Ask us about availability

SI TECH

Sitech, ORUST Neck System

69.00 €

ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments.

En Stock

Available

SI TECH

Sitech® LIANA

60780

103.01 €

LIANA is a user friendly and versatile squeeze-on Dry Glove system. SLÄGGÖ Flex Ring works as attachment platform for LIANA. Don by squeezing. Doff by turning the release ring with one hand. Benefits User friendly Self supported Accomodating most hands Sturdy construction.

En Stock

-23%

Available

SI TECH

Sitech® OBERON

60770

79.32 € 103.01 €

OBERON is a round Dry Glove System that connects with the PU-Ring of SLÄGGÖ Flex Ring. OBERON is an easy to use Dry Glove System, designed to perform - no matter the diving environment. OBERON Dry Glove System is a bayonet system that is easy to lock and release.

En Stock

Available

SI TECH

SLÄGGÖ Flex Ring

71.25 €

SLÄGGÖ Flex Ring is a flexible Modular Quick Change Solution. The design provides superb comfort and is able to be mounted in a great range of garments. The system has a circular shape, so there is no need of indexation/orientation during installation

En Stock

Available

Spare parts

Slide Tri Glide

SFSTG

6.53 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

En Stock

Available

Accessories

Sliding D-Ring 50mm

DR50SLIDE

6.75 €

This D-Ring allows us to use it as a retainer for a classic D-Ring allowing us to move its position up and down, see attached photo as an example.

En Stock

Available

Accessories

Soft cinch

SF-GB50-R

2.10 €

5cm wide cinch Price per meter

En Stock

Available

SI TECH

Spanner Ring for SITECH SLÄGGÖ

60715

6.53 €

En Stock

Pressure Gauge

SPG Scubaforce PSI Black (incl. Swivel)

SFSPG52PSI

45.45 €

En Stock

Available

Reels & Spools

Spool 30 Meter Scuba Force

SFAC92S-6

20.66 €

Spool with Double Ender Stainless Steel 100 feet 30 Meter Center hole diameter, 23 mm Total diameter, 78 mm Width 38 mm

Fuera de Stock

Ask us about availability

REELS, WETNOTES, BUOYS...

Spool 30m Orange Fluor line

SFAC92S-106

20.66 €

Spool with Double Ender Stainless Steel 100 feet 30 Meter orange

En Stock

Available

REELS, WETNOTES, BUOYS...

Spool 30m Yellow Fluor line

SFAC92S-8

20.66 €

Spool with Double Ender Stainless Steel 100 feet 30 Meter yellow.

Fuera de Stock

Ask us about availability

Reels & Spools

Spool 45 Meter Orange Fluor line

SFAC922S-106

20.66 €

Spool with Double Ender Stainless Steel 100 feet 45 Meter orange Center hole diameter, 23 mmTotal diameter, 84 mmWidth 45 mm

Fuera de Stock

Out-of-Stock

Reels & Spools

Spool 45 Meter Yellow Fluor line

SFAC922S-8

20.66 €

Spool with Double Ender Stainless Steel 100 feet 45 Meter yellow Center hole diameter, 23 mmTotal diameter, 84 mmWidth 45 mm

View

En Stock

Available

STEEL HARDWARE

Stainless steel hose clamp

3.20 €

Stainless steel clamps for fixing the breathing hoses, or anything you need... Wide: 12mmTwo sizes available:30 to 45mm (S)32 to 50mm (M) ATTENTION: the price is for one unit.

En Stock

Available

STEEL HARDWARE

Stainless Steel Quick Link

4.96 €

Three sizes availables: Inner space 46mm x 15mm; 6mmØ thread; Maximum opening of the closing 8.5mmInner space 39mm x 13mm; 5mmØ thread; Maximum opening of closing 7.5mmInner space 33mm x 12mm; 4mmØ thread; Maximum opening of the closing 6mm Please, choose your size from the dropdown menu

Fuera de Stock

Product available with different options

COMPLEMENTS

Stainless steel tank clamp W5

5.79 €

6 sizes available: 70mm a 90mm (XS) 90mm a 110mm (S) 100mm a 120mm (M) 120mm a 140mm (L) 140 a 16mm (XL) 170 a 190mm (XXL)

View

En Stock

Available

COMPLEMENTS

Tanks fixation Short

SFPCSH

53.72 €

Tanks fixation Perfect to attach any pony tank like the Argon tank or extra Oxygen tank, to another tank or to the rebreather canister side It´s Stainless Steel made

En Stock

Available

STEEL HARDWARE

Tri Gilde Billy Ring Large

SFAC1042

9.90 €

Welded/fiexed D-Ring ring with a greater height than standard (44 mm in this case) for 50 mm cinch straps.

En Stock

Available

Accessories

Tri glide 50mm with attachment port

SFTGP

7.00 €

Inner diameter of the port: 16mm

En Stock

Available

Accessories

Tri glide butt wide double port 50mm

SFTGBD

14.76 €

Retainer with fixed dual port bent D-Ring

En Stock

Available

SI TECH

Virgo & Glove Lock QCP, Ring

sitech 60523

6.60 €

Ring spare part. This ring is used in the dry glove systems Virgo and Glove Lock QCP

En Stock

Available

SI TECH

VIRGO & Glove Lock Spanner ring

3.80 €

These spanner rings fits with your VIRGO and Glove Lock dryglove systems. There are four different sizes of spanner rings: The Yellow one is the more thin: for thicks gloves (ref. 60535) The Blue is a bit more thick: for medium gloves (ref 60536) The Green one, a bit more thick: for medium plus gloves (ref 60537) And the Red, the thickest: for thin...

En Stock

SI TECH

VIRGO, Sitech

103.00 €

VIRGO is a round Dry Glove System that connects with the PU-Ring of QCS Oval. It provides the recreational diver with an easy to mount, easy to use Dry Glove System, designed to performe - no matter the diving environment. The VIRGO Dry Glove System can be used together with a great variety of dry gloves.

Showing 1-232 of 232 item(s)