DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

Adjustable Fins

Foot Pocket Fins

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Tools

Face Mask

Miscellaneous

Compressors

Pre Owned

Scooters

Outlet

En Stock

Available

REGULATOR ACCESORIES

Adapter 180º UNF Male 7/16"

XS-HL403

19.00 €

En Stock

Available

ADAPTERS

Adapter 3/8" female to 1/4" Male

XS-AC915

30.33 €

En Stock

Available

ADAPTERS

Adapter 3/8" female to 1/4" NPT Male

XS-AC917

18.00 €

En Stock

Available

ADAPTERS

Adapter 3/8" male to 1/4" NPT Male

XS-AC916

15.21 €

En Stock

Available

ADAPTERS

Adapter 9/16" male to 1/4" NPT Male (stainless steel)

XS-AC905

32.81 €

En Stock

Available

Spare parts

End Inflator Mouthpiece

AC-024-0

9.91 €

Replacement mouthpiece for wing end inflator: Xdeep, Dive Rite, Halcyon, OMS, Hollis, Tecline…

En Stock

Available

ADAPTERS

Fow Stop

XS-HL404

39.30 €

Flow stop is placed at the entrance of the regulator. It is especially suitable for cutting the gas flow regulator and thus avoid this streaming put while we are not using. Recomended for those who use scooters and have, for example, to carry their open stages (rebreather) In this way we ensure that gas will not lose anything.

Fuera de Stock

http://www.xdeep.eu/sidemount-butt-plate-beaver-tail-pr-19.html

Out-of-Stock

Accessories

http://www.xdeep.eu/sidemount-butt-plate-beaver-tail-pr-19.html

HA-017-0

36.59 €

Xdeep Sidemount butt-plate

View

En Stock

Available

JJ-CCR

J-CCR Over pressure valve for 1st stage (17bar)

2010200038

29.00 €

Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

Fuera de Stock

Out-of-Stock

ADAPTERS

JJ-CCR Flow Stop

3000-10

64.00 €

View

En Stock

Available

JJ-CCR

JJ-CCR Mouthpiece for BOV or DSV

2050-20

15.70 €

En Stock

Available

JJ-CCR

JJ-CCR Over pressure valve for 1st stage (10bar)

2010200003

29.00 €

Overpressure valve preset at 10Bar, indicated for the 1st stage of Oxygen

En Stock

Accessories

Light battery holder

HA-026-0

12.20 €

Fuera de Stock

Ask us about availability

inicio

Polaris aluminium 2l tank

25000-21

123.00 €

Specifications: Capacity - 2L Working pressure - 200 bar Height - 400mm Diameter - 102mm Approximate weight: 2.6 kg (+/- 4%). Neck thread: 25x2 CE certification Do you need add the valve? Choose the one you need from the link below and let us know if you need us to assemble it: LINK TO THE VALVES

Fuera de Stock

Ask us about availability

valves

Rebreather mono valve G5/8"

T07122

54.04 €

Rebreather mono valve G5/8 (DIN) 232Bar M25 thread (EN-144 FLAT) Clean in O2 service

Fuera de Stock

Ask us about availability

Steel Tanks

Steel tank 10 liters Faber

TNK-232-0010

234.70 €

Faber steel tank of 18 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 12,2 kg (+/-3%) Diameter: 171mm Height: 59,5cm Boot included

Fuera de Stock

Ask us about availability

Steel Tanks

Steel tank 12 liters 232Bar Faber

TNK-232-0012

252.88 €

Faber steel tank of 12 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 15,9 kg (+/-3%) Diameter: 203mm Height: 55cm Boot included

Fuera de Stock

Ask us about availability

Steel Tanks

Steel Tank 15l 232Bar Faber

282.64 €

Faber steel tank of 15 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Working pressure 232 Bar Empty weight (without boo and without valve): 17.4 kg Diameter: 203mm Height: 63cm Boot included

Fuera de Stock

Ask us about availability

Steel Tanks

Steel tank 18 liters 232Bar Faber

TNK-232-0018

308.67 €

Faber steel tank of 18 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 21 kg (+/-3%) Diameter: 203mm Height: 71cm Boot included

Fuera de Stock

Ask us about availability

Steel Tanks

Steel tank 5 liters 200Bar Faber

TNK-200-0005

189.50 €

Faber steel tank of 5 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Mono valve inlcuded Working pressure 232 Bar Empty weight (without boo and without valve): 7,5 kg (+/-3%) Diameter: 140mm Height: 47cm Boot included

Fuera de Stock

-10%

Ask us about availability

TECLINE

Tecline R5 TEC1 Set

10007

282.91 € 314.34 €

The set consists of: I stage R5 TEC II stage TEC1 Hoses: LP 0,70m Proflex black* Tecline bag * choose your color, length and type of hoses in your set!

Fuera de Stock

-10%

Ask us about availability

TECLINE

Tecline V1 ICE TEC1 Set

10010

320.31 € 355.90 €

Set of regulators based on the Tecline V1 ICE first stage: Certified according to EN250 A norm for cold water (recommended for ice diving) Perfect hoses routing in the single tank configuration The set consists of: I stage V1 ICE II stage TEC1 Hoses: LP 0,63m Proflex black* Tecline bag * choose the color, length and type of hoses in the set!

Fuera de Stock

Tecline 1st stage O2 service kit R2 ICE, R2 TEC

Out-of-Stock

Service kits and O-Rings

Tecline 1st stage O2 service kit R2 ICE, R2 TEC

T01400V

39.37 €

Maintenance and service kit with Viton components to use with Oxygen. This kits is for the Tecline R2 ICE and R2 TEC first stages. This kit is also suitable for the first stages: HOG D1, D1X and D2 TDS GULL IST R860 NOTE: Tecline kits are only available to qualified technicians. Do you need this kit? contact us ...

View

Showing 1-24 of 126 item(s)