REBREATHER

rEvo units

HORIZON units

JJ-CCR units

Meg & Pathfdinder Units

SPARE PARTS

COUNTERLUNGS/WINGS

MAVs, Flowstops, fittings, blocks...

O2 SENSORS

PpO2 MONITORS

chemicals

BATTERIES

VALVES

TANKS & MORE...

Tank Labels

BOVs

Cables and adapters

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

Jdive00BH

49.58 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

Fuera de Stock

Ask us about availability

inicio

Cell Retainer nut (pair)

48620207

7.26 €

En Stock

Available

rEvo

Cover Retaining Nut

R201

16.00 €

Unfortunately, many users end up losing this piece. Do not stop diving because you do not have this spare part.

En Stock

Available

O2 SENSORS

CR22D rEvo O2 sensor

48600221

81.82 €

Fuera de Stock

Out-of-Stock

REGULATOR ACCESORIES

Elbow 3/8"

J.Dive-elbow2

24.79 €

Rotating elbow for connection to the first stage, male / female connections 3/8 "The elbow rotates and can be oriented where needed, rotates 360º

View

En Stock

Available

rEvo

Extension 25 mm incl male M8 for Stand

48620608

6.20 €

Fuera de Stock

Ask us about availability

rEvo

Extension 50 mm for Stand

48600793

4.88 €

Fuera de Stock

Out-of-Stock

chemicals

Intersorb 812 20kg ( CO2 absorbent )

48615022

100.05 €

Intersorb 812 CO2 Absorbent 20kg For Rebreathers is a conventional soda lime Carbon Dioxide (CO2) absorbent comprised of short porous strands. Available as an 1-2,5mm mesh particle size to maximize CO2 capacity, for those divers requiring a longer dive duration.

View

Fuera de Stock

Out-of-Stock

chemicals

Intersorb 812 4,5kg ( CO2 absorbent )

48615021

33.05 €

View

En Stock

Available

Meg

ISC heads calibration kit

Calibration Kit J.Dive

74.37 €

It is a kit assembled by us and it consists of a flow restrictor connected to a ISC® genuine head plug by a low hose. It is the easiest and most accurate way to calibrate our Meg, Copis and Pathfinder heads. Only by connecting the flow restrictor to our Oxygen tank with the DIN standard connection and adjusting the Oxygen flow to the right one...

En Stock

Available

JJ-CCR

J-CCR Over pressure valve for 1st stage (17bar)

2010200038

29.00 €

Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent

En Stock

Available

TANK LABELS

J.Dive "DILUENT" Tank label

j.divedil

2.47 €

Diluent Tank Sticker with high adhesion power. Dimensions: 182mm x 34mm

En Stock

Available

TANK LABELS

J.Dive "OXYGEN" tank label

j.diveoxy

2.47 €

Identification Oxygen Sticker for rebreather tanks, with high adhesion power. Dimensions: 184mm x 34mm

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

En Stock

Available

JJ-CCR

JJ-CCR ADV diaphragm

2050-10

32.73 €

ADV diaphragm spare part (JJ-CCR Rebreather)

En Stock

Available

JJ-CCR

JJ-CCR ADV Lever

2300-42

4.50 €

En Stock

Available

JJ-CCR

JJ-CCR ADV PIN

2300-44

2.47 €

En Stock

Available

JJ-CCR

JJ-CCR ADV Push Pin

2300-48

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV spring

2300-45

8.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV stud

3100-01

30.00 €

Tracheas connector from breathing hoses to the ADV of the JJ-CCR rebreather Diameter of the insert in the ADV 37.5mm Bump thickness 2,3mm

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Axial Scrubber

3060-00

239.67 €

Axial scrubber for JJ-CCR rebreather Capacity 2,3kg Autonomy 168´

En Stock

Available 24-48h

JJ-CCR

JJ-CCR backlit bolt spacer + bolt set

4100-42

18.18 €

En Stock

JJ-CCR

JJ-CCR breathing hose protectors

2300-10

24.62 €

JJ-CCR breathing hose protectors (pair)

Fuera de Stock

Ask us about availability

Cables and adapters

JJ-CCR coaxial to to molex Cell adaptor

J.DIVE-CTOM-160

16.00 €

This adapter is especially suitable to use Molex sensors in our JJ-CCR head NOTE: The ideal cable length is 160mm.

Showing 1-24 of 97 item(s)