JJ-CCR

En Stock

inicio

Breathing hoses ballast (pair) (pre owned)

49.58 €

Weight rings for JJ-CCR breathing hoses. The rings are made of stainless steel and have exceptional finishes, which also fit perfectly into the JJ-CCR breathimngs hoses Specs:: Weigh 300gr/unit Inner: 36mm Outer: 56mm Width: 25mm NOTE: this product is used. It presents slight signs of wear that in some areas reveal the interior brass, nothing that could...

Fuera de Stock

Ask us about availability

BOVs

Divesoft BOV for...

767.25 € 825.00 €

Description Divesoft BOV for use with any rebreather listed at the dropdown menuSupplied together with two clamping rings. CE approved to EN250:2014

En Stock

Available

Meg

Dust Cap Set 9/16" (male & female)

DS-2

41.73 €

Female and male metal Dust Cap for the 9/16 "regulator hose connections Ideal for protecting the hose terminal, rebreather head inlet, BOV, etc ...

En Stock

Available

Meg

Dust Caps 9/16"

NAN0003

23.97 €

These dust caps are made to fit any standard 2nd stage hose and reg fitting.One use is to cap the oxygen solenoid and hose of your rebreather or cap the ends of the ADV hoseIt fits the kiss BOV, or can be used simply to protect and keep hoses clean.ALSO FITS ANY STANDARD 9/16 REGULATOR FITTINGThey come as a set 1 male and 1 female (one for the hose and...

En Stock

Available

JJ-CCR

J-CCR Over pressure valve for 1st stage (17bar)

2010200038

29.00 €

Overpressure valve preset at 17Bar, indicated for the 1st stage of Diluent

En Stock

Available

DECO ESSENTIALS

JJ CCR Bailout Clamps (pair)

62100101

19.00 €

Stainless steel cylinder clamps with webbing to prevent scratches and abrasions. Used to secure the diluent cylinders, typically 7 liter or similar, in a GUE configured JJ CCR. Four would normally be required per unit.

En Stock

Available

JJ-CCR

JJ-CCR 3-Way Manifold

4100-30

53.72 €

3-way manifold with 9/16" male connection (to connect a standard regulator hose) and three 3/8" female connections (for standard regulator hose connection)

En Stock

Available

JJ-CCR

JJ-CCR ADV diaphragm

2050-10

32.73 €

ADV diaphragm spare part (JJ-CCR Rebreather)

En Stock

Available

JJ-CCR

JJ-CCR ADV Lever

2300-42

4.50 €

En Stock

Available

JJ-CCR

JJ-CCR ADV PIN

2300-44

2.47 €

En Stock

Available

JJ-CCR

JJ-CCR ADV Push Pin

2300-48

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV spring

2300-45

8.00 €

En Stock

Available

JJ-CCR

JJ-CCR ADV stud

3100-01

30.00 €

Tracheas connector from breathing hoses to the ADV of the JJ-CCR rebreather Diameter of the insert in the ADV 37.5mm Bump thickness 2,3mm

Fuera de Stock

On Demand

JJ-CCR

JJ-CCR Axial Scrubber

3060-00

239.67 €

Axial scrubber for JJ-CCR rebreather Capacity 2,3kg Autonomy 168´

En Stock

Available

JJ-CCR

JJ-CCR Back Plate Bolts

JJ-CCR-Screw-Set

11.82 €

JJ-CCR Back Plate Bolts

En Stock

Available 24-48h

JJ-CCR

JJ-CCR backlit bolt spacer + bolt set

4100-42

18.18 €

En Stock

JJ-CCR

JJ-CCR breathing hose protectors

2300-10

24.62 €

JJ-CCR breathing hose protectors (pair)

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR Complete DSV

3100-00

485.12 €

Full DSV including everything visible in the image

En Stock

Available

JJ-CCR

JJ-CCR Complete OPV (Dump valve)

4100-00

42.00 €

JJ-CCR counter lung dump and overpressure valve Complete, interior and exterior parts.

En Stock

Available

JJ-CCR

JJ-CCR Counter Lung fitting complete

2300-36

34.50 €

Complete fixation, includes: Male Female O-Ring

En Stock

JJ-CCR

JJ-CCR Counter Lung inner bag

33.00 €

JJ-CCR rebreather counter lung inner bladders Choose the required one, inhalation or exhalation, from the drop-down menu

En Stock

JJ-CCR

JJ-CCR Divecan HUD Protector

DCHP

63.99 €

Divecan HUD Protector - Fits multiple Units inc. JJ-CCR, Hollis Prism, Optima

Fuera de Stock

Ask us about availability

JJ-CCR

JJ-CCR DSV

3100-05

224.79 €

DSV without breathing hoses and mouthpiece, as shown in the image

En Stock

Available

JJ-CCR

JJ-CCR DSV lever

3100-10

12.00 €

En Stock

Available

JJ-CCR

JJ-CCR DSV O-ring kit

2000-20

20.10 €

En Stock

JJ-CCR

JJ-CCR Exhale stud Head

2300-02

30.00 €

Tracheas connector from breathing hoses to the exhale head side. Diameter of the insert in the head 39.5mm Bump thickness 3.5mm

En Stock

Available

JJ-CCR

JJ-CCR Flapper valves for DSV or BOV

2050-00

24.50 €

Both mushrooms valves are included

Fuera de Stock

Out-of-Stock

ADAPTERS

JJ-CCR Flow Stop

3000-10

64.00 €

View

En Stock

Available

JJ-CCR

JJ-CCR Gasket for Lung Release Valve

30070800

9.00 €

En Stock

Available

JJ-CCR

JJ-CCR Heavy duty cam band

3400-00

26.25 €

En Stock

Available

JJ-CCR

JJ-CCR HUD

2200-10

247.11 €

HUD for rebreather JJ-CCR model DiveCan New HUD model for the JJ-CCR JJ's HUD now comes mounted on a holder to avoid pressure on it every time we mount and dismount it from the HUD DSV holder. In this way, what we will mount, consequently what we will put pressure on, will be on the support on which it is already mounted. In this way the life of the...

En Stock

Available

inicio

JJ-CCR HUD Analog button

2200-15

52.00 €

En Stock

JJ-CCR

JJ-CCR inhale stud Head

2300-01

30.00 €

Tracheas connector from breathing hoses to the Ts of the JJ-CCR rebreather Diameter of the insert in the head 37.5mm Bump thickness 3.5mm

En Stock

JJ-CCR

JJ-CCR Lockring for breathing hose

2300-05

2.50 €

En Stock

Available

JJ-CCR

JJ-CCR Lockwasher for breathing hose

2300-06

3.00 €

En Stock

Available

JJ-CCR

JJ-CCR Loop hose

2300-00

30.17 €

JJ-CCR Loop hose 1m long

Showing 1-36 of 63 item(s)